Finite Element Analysis of Universal Motor Based on Reverse Engineering
DOI:
https://doi.org/10.58564/IJSER.3.2.2024.180Keywords:
ANSYS Maxwell, FEM , Reverse Engineering ,Universal MotorAbstract
This paper present an innovative methodology in analyzing a universal motor which not having design data by extracted it via reverse engineering . These gained data were used to model the motor by Maxwell program and analyzing it by FEM to get motor performance results , which showed a good agreement with motor test results .The success of a paper methodology proved the possibility of analyzing any electric motor by Maxwell program even if the motor is without design data.
References
Araga, I. A., Airoboman, A. E., Inalegwu, A. P., Afolayan, I. A. & Adunola, F. O. A comparative analysis on the performance of universal motor when driven by alternating current/direct current. Aust. J. Sci. Technol. 4, 348–352 (2020).
Nayak, D. S. & Shivarudraswamy, R. Efficiency and Loss analysis of the Universal motor by theoretical and experimental in the application of the mixer grinder. 2020 8th Int. Electr. Eng. Congr. iEECON 2020 4–7 (2020) doi:10.1109/iEECON48109.2020.229457.
Qi, H., Ling, L., Jichao, C. & Wei, X. Design and research of deep slot universal motor for electric power tools. J. Power Electron. 20, 1604–1615 (2020).
Sharma, S. K. & Manna, M. S. Finite element electromagnetic based design of universal motor for agro application. Int. J. Electr. Electron. Res. 10, 590–596 (2022).
Ben Abdeljawed, H. & El Amraoui, L. Simulation and rapid control prototyping of DC powered universal motors speed control: Towards an efficient operation in future DC homes. Eng. Sci. Technol. an Int. J. 34, 101092 (2022).
Nayak, D. S. & Shivarudra Swamy, R. e. Proc. - 2018 IEEE Int. Conf. Autom. Control Intell. Syst. I2CACIS 2018 105–110 (2019) doi:10.1109/I2CACIS.2018.8603693.
Oancea, C. D., Petre, V. C. & Boice, V. A. Educational and Experimental Study for Evaluation of an Universal Motor. 2019 11th Int. Symp. Adv. Top. Electr. Eng. ATEE 2019 (2019) doi:10.1109/ATEE.2019.8724929.
Nayak, D. S. & Shivarudraswamy, R. Loss and Efficiency Analysis of BLDC Motor and Universal Motor by Mathematical Modelling in the Mixer Grinder. J. Inst. Eng. Ser. B 103, 517–523 (2022).
Sharma, S. K. & Manna, M. S. Performance Analysis of Universal Motor Based on Matlab Simulation. in 2022 International Conference for Advancement in Technology (ICONAT) 1–4 (IEEE, 2022).
Farrahov, D. R. & Miniyarov, A. K. Development of The Universal Apparatus for Induction Motors with Combined Winding Design. in 2019 International Conference on Electrotechnical Complexes and Systems (ICOECS) 1–4 (IEEE, 2019).
Nayak, D. S. & Swamy, R. S. Loss and efficiency analysis of universal motor used in mixer grinder by mathematical modelling. in 2018 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS) 105–110 (IEEE, 2018).
Kurihara, K. & Koseki, S. New design of high output equivalent 4-pole universal motor. in 2018 XIII International Conference on Electrical Machines (ICEM) 291–296 (IEEE, 2018).
Xheladini, L., Tap, A., Asan, T., Yilmaz, M. & Ergene, L. T. Permanent Magnet Synhronous Motor and Universal Motor comparison for washing machine application. 2017 11th IEEE Int. Conf. Compat. Power Electron. Power Eng. CPE-POWERENG 2017 381–386 (2017) doi:10.1109/CPE.2017.7915201.
Tezcan, M. M. et al. Analysis of one phase special electrical machines using finite element method. in 2017 International Conference on Electromechanical and Power Systems (SIELMEN) 113–118 (IEEE, 2017).
Polat, A., Ergene, L. T. & Firat, A. Dynamic modeling of the universal motor used in washer. Int. Aegean Conf. Electr. Mach. Power Electron. ACEMP 2011 Electromotion 2011 Jt. Conf. 444–448 (2011) doi:10.1109/ACEMP.2011.6490640.
Lin, D., Zhou, P. & Stanton, S. An analytical model and parameter computation for universal motors. in 2011 IEEE International Electric Machines & Drives Conference (IEMDC) 119–124 (IEEE, 2011).
Hanselman, D. C. Brushless permanent magnet motor design. (The Writers’ Collective, 2003).
Salon, S. J. Finite element analysis of electric machinery. IEEE Compute. Appl. power 3, 29–32 (1990).
A. J. Kadhim, "Finite Element Analysis of a Reluctance- Augmented Shaded-Pole Motor," M.Sc. Thesis, Mustansiriyah University, College of Engineering Electrical Engineering Department Iraq, 2022.
Arkkio, A. Analysis of induction motors based on the numerical solution of the magnetic field and circuit equations. (Helsinki University of Technology, 1987).
M. Ridwan, M. N. Yuniarto and Soedibyo, "Electrical equivalent circuit based modeling and analysis of brushless direct current (BLDC) motor," 2016 International Seminar on Intelligent Technology and Its Applications (ISITIA), Lombok, Indonesia, 2016, pp. 471-478, doi: 10.1109/ISITIA.2016.7828706.
S. J. Salon, "Finite element analysis of electric machinery," in IEEE Computer Applications in Power, vol. 3, no. 2, pp. 29-32, 1990.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Roa′a N. Nassrullah, Amer M. Ali
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
